|
MaverickBond Fill - Dual Action Chemical Weld Filler A powder to be used in conjunction with the MaverickBond Adhesive to fill or stem puncture/holes/gaps, build back broken surfaces, give additional strength to joins or act as a sealant. Particularly useful when surface area available is inadequate thus weak on the shear, the MaverickBond Fill will ensure additional strength.Apply MaverickBond Fill of approximately 2-3mm thickness and impregnate thoroughly with MaverickBond Adhesive. Setting time is a few second, however, allow few minutes if the Fill is to be processes mechanically, tapped or varnished. Commonly referred to as a micro balloon, it is made up of silica, alumna and quartz. Applying MaverickBond Adhesive as a hardener, it creates an exothermic reaction to weld the powder components together. Particularly effective and useful in doing plastic mouldings and fibreglass repairs. MaverickBond Fill is non-toxic, does not damage the environment and can be disposed of together with household wastes. Suitable for all materials.
Instructions - Put on MaverickBond Fill and soak thoroughly with MaverickBond Adhesive. The stability of such on, usually impossible joint, can be obtained by using MaverickBond Fill. Knocked out or broken off materials can be refilled with MaverickBond Fill and can then be fixed by putting on MaverickBond Adhesive. In connection with MaverickBond Adhesive, MaverickBond Fill is most suitable to refill and replace broken off material of any kind. |